Hall Element Application on Bluetooth Headset

Bluetooth headset is the application of Bluetooth technology in hands-free headset, so users can get rid of the original headphones troubled, more convenient to a variety of ways to easily call or entertainment.

Due to the unique properties of Hall devices (solid structure, small size, light weight, long life, easy installation, low power consumption) is far superior to the reed pipe, is also widely used in the Bluetooth headset industry. Because Bluetooth headset power saving, support for long time calls, low-cost features, which determines the choice of the Hall element requires energy saving, low cost, small size.

Hall element

Hall components are mainly divided into unipolar Hall element, bipolar (latch) Hall element, linear Hall element, all-pole Hall element on the market.The one widely used in Bluetooth headset is unipolar low-power Hall switch consumption.

The main features are:
Noise protection, chopper stabilization technology, ultra-low voltage can reach as low as 1.65V，
High sensitivity, consistency and stability.

Related products links: Hall Switch, Signal-Type Wiegand Sensor

评论

发表评论

此博客中的热门博文

Omnipolar Hall IC

图片
  Omnipolar Hall IC The omnipolar Hall-effect sensor  includes the following on a single silicon chip: reverse voltage protector, voltage regulator, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open-drain output driver, etc. Produced with CMOS technology, an omnipolar Hall IC is asked for lower supply voltage and less power supply. It is available in two package types: SOT-23-3L (Type M) and TO-92UA (Type UA). More detail of China Hall Sensor , please via: https://www.ahest.net/
阅读全文

Method Of Detecting Switch Type Hall Sensor

图片
In the use of hall sensor for maintenance machinery, we will encounter holzer not working, from holzer's shape can not distinguish whether the holzer element is damaged, and how to detect whether the switch type of hall sensor is damaged. Taking Holzer YS282 as an example, the test method of switch type Holzer element is as follows: First, find a resistance R of 1K Omega, which is connected to the figure 1 and 3 feet, and connect the positive pole of the DC power of the 12V to the foot of the  switch type hall sensor YS282, and the anode is connected to the foot. The multimeter is placed in a DC 50V file, the red pen is connected to the foot, and the black pen is connected to the foot, and the pointer changes of the multimeter are observed. When the magnet N is very close to the test point of the hall sensor YS282, the pointer of the multimeter is deflected from the high level to the low level; when the N pole of the magnet is far away from the test point of the Holzer element Y
阅读全文

How To Use Water Flow Sensor？

图片
The  Water Flow Sensor  consists of a plastic valve body, a water rotor and a Hall Effect Sensor. When the water flows through the rotor, rotor rolls and the speed of it changes with a different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This type of sensor can be found on different diameters, water pressure (MPa) and flow rate (L/m) ranges. Make sure to select one that will cover your needs. The sensor that I have it has 20mm diameter, <1.75Mpa water pressure and ~30 L/m flow rate range. A  Water Flow Meter Sensor  is a device that measures the amount of water flowing through a pipe. There are several water flow meter technologies to choose from depending on the water measurement application, maintenance requirements, and budgetary terms.  Each of these types of water flow meters has a unique principle of operation, specific application benefits, and overall cost-of-ownership. The question is: What water flow meter should you choose for your w
阅读全文